A superconducting cavity of the same shape as used for the development of superconducting photo injectors has been built for the studies of high magnetic field induced Q slope due to the local heating. The multipactoring problem has been observed on the TE011 mode, 3.3GHz with magnetic field barriers. To understand and overcome this problem, 3D multipactoring simulations by Omega3P and Track3P have been done and found these to be one-point multipactors pulled out from the flat bottom surface by finite normal component of electric field. Asymmetric coupling ports on the side of the beam tube could have caused the distortion of the TE011 mode. The thermometry measurement later confirmed the predicted impact locations. A structure modification has been adopted based on the simulation prediction. More experimental results with the new geometry will allow further comparison with the 3D multipactoring simulations. Show Partial Abstract